English > Products > Telecom Operation&Testing > XDSL > S600 VDSL2 Tester with TDR Function

InformationParametersDownloads
Information

Features

Support VLAN, Vectoring,Compliant with all known DSLAMs

Supports Modem emulation and simulating login to Interne

Supports ISP login (username / password) and IP Ping test (WAN PING Test, LAN PING Test)

Support optical power meter, VFL function

Support cable tracing, check line sequence, landline telephone function

Support cable fault locator (TDR) function

Main User Interface:

 

Order Information

Module Code

Standard / Basic Part

ADSL; ADSL2; ADSL2+; READSL; VDSL2 function

 

S600

DMM function

D

TDR-4KM (8km,16km optional)

4

Optical Power Meter Module

G

VFL Module

H

Cable Tracing

X

Check Line Sequence

W

Landline Telephone

T

Parameters

xDSL Index

xDSL test main functions

Physical Layer Info
PPPoP Dial
FTP Client, Fixative IP
Network Layer Test
Modem Emulation
PING
Support VLAN,HLOG,QLN
Error Code Statistics
Bit Graph Display
BPT /SNR Data
Modem Parameter Setting(VPI/VCI)

ADSL Index

Standards

ITU G.994.1 (G.hs), ITU G.992.5, ITU G.992.5 Annex L. The max distance which can be connected is 6.5km. Be compatible with ADSL, ADSL2 and READSL.

Attenuation:

0~63.5dB

Noise margin

0~32dB

Upstream Channel Rate (interweaved / fast mode)

0~1.2Mbps

Downstream Channel Rate (interweaved / fast mode)

0~24Mbps

The modulating bits in the DMT sub-channel

0~15 and each sub-channels' frequency points

The number of error codes

CRC, HEC, FEC, NCD, OCD

Other Parameters

The output power of DSL

It can display every condition of the DSL line: lost signal and shutdown of link

VDSL2 Index

Standards

ITU G.993.2(VDSL2).Be compatible with ADSL2+, ADSL standard.

Upstream Channel Rate (interweaved / fast mode)

0-100M

Downstream Channel Rate (interweaved / fast mode)

0-100M

The modulating bits in the DMT sub-channel

0~15 and each sub-channels' frequency points

The number of error codes

CRC, HEC, FEC, NCD, OCD

Other Parameters

The output power of DSL
It can display every condition of the DSL line: lost signal and shutdown of link
DSLAM information
Error seconds
INP pulse protection
SNR channel figure
Channel noise margin figure                                                                                            

Support profiles:

Profile 8a, 8b, 8c, 8d, 12a, 12b, 17a

DMM Test Index

DC Voltage

-400 to 400 V;Resolution: 0.1V

AC Voltage

0 to 290 V

Capacitance

0 to 1000nF;Accuracy: 0-10nF: ±2nF, 10nF-1000nF: ±2 %±2nF

Loop Resistance

0 to 20KΩ;Accuracy: 0-100: ±3%±4Ω, 100-500: ±3%, 500-20 KΩ: ±2%

Insulation Resistance

0 to 50MΩ;Accuracy: 0-1.0M: ±0.1 MΩ, 1.0-30M: ±10%±0.5 MΩ

TDR Index

General specifications

Check line mix and break fault.

Auto and manual distance test

Test Range

8km(4km,16km,32km is optional)

Highest resolution

1km

Dead Zone

0m

Power consumption

1W

VOP Adjusting range

100-300 m/us

Distance test accuracy

≤1m

Pulse test voltage range

≥30V

Cable Tracking Index

Test cable type

Network cable, twisted pair cable, telephone line, USB cable, coaxial cable.

Line status test

Determine open or short circuit

Voltage polarity detection

Positive and negative of DC voltage

Distance of signal transmission

No less than 3km

DC Voltage

No more than 48V

Check Line Sequence Index

Function

Support generate network line signal to view the network check line sequence with the receiver

Feature

Easy to operate: determine the line sequence by receiving side lights order

Optical Power Index

Wavelength range(nm)

800~1700

Photosensing material

InGaAs

Power test range(dBm)

-70~+10 or -50~+26

Error range

±5%

Display distinguishability

Linear display: 0.1%;logarithmic display: 0.01 dBm

 Adapters

FC, ST, SC

VFL Index

VFL

FP-LD

Wavelength

650nm±20nm

Output power

1mw/3mw/5mw/10mw (optional)

Connector

2.5mm universal adapter(SC, FC, ST)

Working mode

CW or 2Hz modulation

Applicable fiber

SM / MM

Downloads
S600 VDSL+TDR Datasheet .pdf
20190513153800717.pdf (331.09 KB)