English > Products > Telecom Operation&Testing > Optical Power Meter > ST007 Fiber &Copper Cable Tester

InformationParametersDownloads
Information

Main functions and key features:

  1. Multi-wavelength precise measurement.

  2. Absolute power measurement of dBm or xW.

  3. Relative power measurement of dB.

  4. Auto off function.

  5. LCD backlight display.

  6. Auto off LCD backlight display function.

  7. Test and show the battery voltage.

  8. Design for test low voltage, low voltage power off function.

  9. Check line sequence function.

  10. Cable tracking function: it can quickly find the needed line among many disordered lines. When switchboard is with weak electricity, it can also check the line.

 

Parameters

General specifications

Auto shut off

10 minutes

Auto close backlight

10 seconds

Working temperature

0℃~ +40℃

Storage temperature -10℃~ +40℃

Weight (g)

220

Dimension (mm)

160*76*28mm

Battery

3.7V/620mAh rechargeable Li battery

Relative humidity

 20%~75%(Non-condensation)

Optical power meter module

Wavelength range (nm) 800~1700
Detector type InGaAs
Measurement range (dBm) -50~+26, -70~+10
Uncertainty ±5%
Resolution 0.01 dBm

 Adapters

FC, ST, SC

Visual  fault locator module

VFL

FP-LD

Wavelength

650nm±20nm

Output power

1mw/3mw/5mw/10mw (optional)

Connector

2.5mm universal adapter(SC, FC, ST)

Working mode

CW or 2Hz modulation

Applicable fiber

SM / MM

Check line sequence  module

Function

Support generate network line signal to view the network check line sequence with the receiver.

Feature

Easy to operate: determine the line sequence by receiving side lights order

Cable tracking  module

Test cable type

Network cable, twisted pair cable, telephone line, USB cable, coaxial cable.

Line status test

Determine open or short circuit

Voltage polarity detection

Positive and negative of DC voltage

Distance of signal transmission

No less than 3km

DC Voltage

No more than 48V

 

Downloads